sakura-vps/FreeBSD/6rdについて、ここに記述してください。
http://research.sakura.ad.jp/2011/01/12/tunnel-6rd-freebsd/ /設定
FreeBSD 8.2 では stf が使えるらしい。
lo0 の現状
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
%grep ipv6 rc.conf
#firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for #firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple" #firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix #firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple" #firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix ipv6_enable="NO" # Set to YES to set up for IPv6. ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) ipv6_static_routes="" # Set to static route list (or leave empty). #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. ipv6_router_flags="" # Flags to IPv6 routing daemon. #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local #ipv6_router_flags="-q" # If you want to run a routing daemon on an end #ipv6_network_interfaces="ed0 ep0" # Examples for router #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. ipv6_default_interface="NO" # Default output interface for scoped addrs. stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,